AUS 9337
mainsheet bridle with 2 blocks,
the Foil control cable with end fittings
Wand
Shackle for the forestay
Hull lacing rope,
2 x Cam cleats for outhaul.
2. Cradle/Trolley with 2 x pneumatic wheels
3. Rudder Gantry, carbon box with bolts to attach to transom, bottom connection is a Ronstan turnbuckle to adjust the range of the rudder angle of attack
4. Carbon Mast – Burvil 2 Piece mast, 50mm diameter
5. Carbon Boom – Burvil with Mainsheet ratchet, boom pin and outhaul system attached
6. Sail – Gemmell Mk 2 8m2 pocket luff sail with black batten pockets and green sail numbers including camber inducers in a yellow sail bag.
7. Carbon spreaders – 3 pronged spreader arrangement including spreader mount Pin
8. Shrouds, 2 x Side stays and 1 x Forestay,
9. 2 x Longitudinal wing tubes – approx 70mm diameter carbon tubes – interchangeable between sides
10. 1 x Front wing frame – including 4 x swivel cleats and blocks and ropes for 16:1 Vang, 8:1 downhaul, turning blocks for outhaul and 2 shroud adjusters.
11. 1 x rear wing frame
12. 2 x wing tramps
Standard Centreboard, light green
14. Standard T-foil rudder, light green with square aluminium tiller)
15. Hydrofoil centreboard, dark green, with 1/8” stainless steel pushrod and stainless steel bell-crank, inside cloth cover/
16. Hydrofoil Rudder, dark green, fixed foil inside cloth cover
17. Hydrofoil rudder Tiller and extension (carbon), rudder pin will be poked through tiller to avoid angle of attack adjusting mechanism winding loose.
18. 4 x Stainless steel U-bolts with nuts and washers.
19. 2 x toe straps
20. Dynema rear wing tie
$6,300 or make me a offer
Boat in GOOd Condition ready to be sailed.. email me for pics
jakey84@hotmail.comor contact me on 0421997568 .